Retail Price - $39 Sale Price - $19.99 + Free Shipping
Universal Type (Fit all Bulb Size)
harness or other might call it the BMW/Mercedes Benz harness
is known to get rid of the flickering issues or headlamp
error light issue. This issue is known on most European cars
(BMW/BENZ/AUDI) and now it is occur on some American cars
(CHRYSLER/DODGE/JEEP). The reason behind this is due to
halogen bulb being 55W and HID being 35W. Therefore, when an
HID kit is installed into the vehicle, the car ECU detect
the lights running at 35W instead of the normal 55W.
things will happen when it detect this.
1. When running at
35W, the ECU thinks the light bulb on one side is broken and
cut down on the power it sends to the headlight, causing the
HID to flicker because there is not enough power.
2. It will
cause a headlight error light on the dash because it think 1
side of the headlight is broken. One or both of these issue
The flicker harness will plug inline with the
ballast (Plug and Play harness). The flicker harness will
trick the ECU into thinking the HID is running at 55W, when
it is really running at 35W. This will trick the ECU into
thinking that both side of the headlights are working fine
and will allow the ECU to give the headlights full power to
run properly, which will get rid of the flickering issue and
error light issue. This harness is safe and will not damage
any ECU or electrical wiring.
Play-N-Play Flicker Harness
Get Rid of
Error Lights and Strobe/Flickering Lights
ISO9001 Certification and European
E-Mark for 100% guaranteed product quality
connectors and grommets